In ports, steel mills and heavy-manufacturing bays, overhead and gantry cranes move heavy loads above people and equipment. Lighting there has to deliver clear, consistent illumination from height — often in hot, dusty, around-the-clock conditions where a failed fixture means downtime and work at height.
Older metal-halide and high-pressure-sodium fixtures struggle in these spaces: slow warm-up and re-strike, lumen depreciation, high energy draw and frequent lamp changes.
NuTec LED crane lighting is built for this setting: a sealed IP66 housing, an aluminum-alloy body with optimized heat fins for natural convection, and Lumileds / Osram LEDs rated for 50,000 hours — so light stays on and maintenance trips drop.
IP66 Sealed Housing
Protected against dust and powerful water jets.
Lumileds / Osram LEDs
International-brand light source for high, consistent output.
Aluminum-Alloy Body + Heat Fins
Sheds heat by natural convection.
Power Factor ≥0.90
Efficient electrical performance.
-20 to 45°C
Operates across hot bays and cold stores.
10 kV Surge Protection
Guards against surges on industrial power.
Universal 120-277 V
One fixture for common voltages, 50/60 Hz.
50,000-Hour Rated Life
Fewer fixture changes at height.
| Specification | 120W | 240W | 300W ★ Most popular | 360W | 500W |
|---|---|---|---|---|---|
| Luminous flux | 18,000 lm | 36,000 lm | 45,000 lm | 54,000 lm | 70,000 lm |
| Efficacy | 150 lm/W | 150 lm/W | 150 lm/W | 150 lm/W | 150 lm/W |
| Dimensions (mm) | 199 × 316 × 105 | 333 × 242 × 149 | 333 × 456 × 192 | 333 × 456 × 192 | 333 × 582 × 192 |
The compact entry point — 18,000 lumens for lower mounting heights, walkways and service areas around the bay.
Balanced mid-range output — 36,000 lumens for general high-bay coverage and medium mounting heights.
Serious floor illumination — 54,000 lumens for taller gantries and larger crane bays.
The range-topper — 70,000 lumens for the highest mounts and widest bays. Maximum coverage per fixture.
10° NARROW
20° NARROW–MEDIUM
40° MEDIUM
60° WIDE
90° WIDE FLOOD
ASYMMETRIC / TYPE IV
10° NARROW
20° NARROW–MEDIUM
40° MEDIUM
60° WIDE
90° WIDE FLOOD
ASYMMETRIC / TYPE IV
An industrial LED floodlight for crane and high-bay environments. The 300W model produces 45,000 lumens at 3000K in an IP66 aluminum-alloy housing, and is also available in 120W–500W.
NuTec crane lights is rated IP66 — protected from total dust ingress and high pressure water jets from any direction.
All models conform to RoHS, CE and TÜV.
Five wattages — 120W, 240W, 300W, 360W and 500W — each in 3000K warm white and 5700K cool white. The 300W (45,000 lm) is our most popular, and every model shares the same IP66 aluminium housing and 150 lm/W efficiency.
All models has a rated life of over 50,000 hours and is covered by a 36-month warranty.
All models use solid-state LEDs in a sealed aluminum-alloy housing (no glass arc tube or filament). For specific vibration or impact requirements, contact our team and we'll confirm the right specification.
Yes — NuTec LED is supplied from six locations across the Philippines (Santa Rosa HQ, Cavite, Subic, Clark, Cebu, Baguio), with delivery and after-sales support.
Universal 120–277V AC at 50/60Hz, with 10kV surge protection and a power factor of 0.90 or higher.
It depends on mounting height and bay size — roughly 120–240W for lower/smaller bays, 300W for most standard crane bays, and 360–500W for high gantries and large spans. Send us your crane height and dimensions and we'll spec it for you.
- Address
- Filsyn Corporation Compound, Brgy Don Jose, City of Santa Rosa, 4026 Laguna, Philippines.
- Email ntpctmsg@gmail.com
- Mobile 0917-861-2778
- Landline 049-541-0214
- FAX 049-530-1879